Before starting to paint the walls, you need to definitely decide on the design of the room. You need to carefully consider the interior design so that in the end, you get exactly what you conceived.
If you are going to paint your walls, first you need to remove the switches, sconces, sockets, etc. D. Places that are not subject to color, you need to seal with a painting tape. It is also advisable to paint the places along the ceiling and the floor in a small roller, so that it is later painted with a large roller, without worrying that the paint will fall on the floor or ceiling.
There are several main staining methods: roller, brush, sprayed.
For the first species, rollers 19-26 cm wide are most suitable, with a short or middle pile. It is necessary to paint with stripes of 2-3 roller width, painting from the window to the left. When it finishes the first lane-start the next one, again from the window. Strack with stripes on top-down, but the last movement should be from the bottom-up. This will reduce the pressure on the roller.
When you stain the wall with a brush – keep it with a slight slope to the wall. First make movements in one direction, then in the direction of the perpendicular to it. Be sure to shake the paint well, otherwise it will flow.
Using a sprayer, you need to paint the wall, applying only vertical or horizontal stripes. If there is a docking of flowers in any place-this problem is solved by the dedicated ruler. Lean it with a slope to yourself and shift it, thus staining the segments of 100-150 mm.