If you made repairs not so long ago in the room and after a while the new linoleum swollen a “hat”, this, of course, is a disaster. The reason for its swelling lies in improper laying. It is not difficult to eliminate the swelling of linoleum and you can cope yourself. Elimination of linoleum swelling. We will talk about some in this article. 1 method. Take an ordinary awl and pierce the place of bloating. Release all the air accumulated under linoleum and close the hole with paper. Then this place should be well ironed with a hot iron. But this method is good only if the linoleum was laid on bitumen. 2 method. Bloating with a knife is cut and a solvent is introduced into this hole under the linoleum. Then linoleum should be smoothed out and the load is put on it.
3 method. If you do not want to make punctures and cuts, then you need to remove the entire linoleum panel, clean it and the floor and put it again. 4 capacity. If linoleum was stored in the roll for a very long time, then he will take this Ellipse form. And when you bed such linoleum, it is a high probability that it will lie in waves. Therefore, before thoroughly passing linoleum in the room, you should give it the opportunity to lay down a couple of days. If necessary, let it lie down longer. If even a week later the waves do not disappear, then the linoleum should be ironed, or a large load is put on it.