Next, we primer the ceiling and put down two to three times. To do this, we use tools such as a wide spatula, a bucket, a stirrer, grinding equipment for thin grinding and of course the putty itself. Ceiling, in front of each putty, it is advisable to primer. After each putty, you need to roll the surface, that is, wipe with sandpaper. After that, go to our walls. We put it down 2 times using the same technology – putty, then a skin and then a primer. To remove deep recesses – we apply a layer of putty on the spatula, depending on the depth of the cavity and with strong pressure, we draw on the wall – the fossa and bumps are filled with putty. After all the operations – we paint the ceiling, glue wallpaper, we lay a new coating, fasten new skirting boards. This is where your repair is over.
Is it possible to make royal mansions out of an ordinary room Today we will tell you about how to turn your boring room into divine mansions. Where will we start repairs? Of course, before starting, you need to decide what kind of type this room should have after the end of work. Decide on the design – paper or vinyl wallpaper; parquet, laminate, linoleum or carpet; how many sockets and lighting items should be present in the room. After we have decided on the design, we start work. We free the room. Soak the old wallpapers with water using a roller, then take a spatula and tear them off the walls. Then we make a cavity in the wall for wires, drill new “boxes” for sockets. The places where the wires are laid covered with Alabastr the flush with the wall. We place sockets at a height – 30cm from the floor, and switches – 90cm.
- September 17, 2018