“Parquet Symphony” is a consequence of loosening and the formation of cracks. The first and most important step to restore parquet masonry. Scheduled parquets must be fixed with nails. The “creaking” places should be fixed with wooden pins, smeared with glue, previously drilled holes at an angle of 45 degrees. All prepared places must be trapped with a special composition, which consists of sawdust and varnish. By the way, now they often began to buy LED E27 lamps they are inexpensive.
Another small advice from specialists so as not to stain the floor, you can cut a stencil of paper or cardboard, which will keep the rest of the parquet clean. To restore the drawing, it is recommended to draw wood lines in ordinary awl in thick places with ordinary awl. Then we clean the renovated areas with sandpaper with a large coating. Then we degrease the cleaned areas with acetone and apply parquet glue.