So, let’s start … the walls of the walls of the gas concrete blocks laid out from the simultaneous construction of the walls by the builders or masters, and after the building is completely built by the builders, all this depends on the facing material used (more precisely on the characteristics of the facing material used, and not on The names of the facing material used). The walls of aerated concrete blocks are not whimsical to wall decoration, they can be lined with any finishing material, or facing material, there are no restrictions in this regard. As facing materials, such building materials and finishing materials such as brick, siding, decorative plaster, texture putty, natural stone and many other finishing materials offered by the building materials and finishing materials market are suitable.
If you decide to clad a house laid out of aerated concrete by builders, natural stone or gypsum tiles, the walls should be correctly prepared for facing work in accordance with the rules and instructions. Do not forget to buy white tile glue the surface of the walls, which will be faced, treated with two layers of a primer of deep penetration (high -quality), after which a metal plaster mesh is mounted over the entire surface of the wall. The grid is attached to the wall with a rapid installation with dimensions of 6 by 40mm.
When facing the surface of the wall with a natural stone or gypsum tiles, special mixtures for gluing ceramic tiles should be used as an adhesive mixture.