Can you put a laminate with your own hands: tools for work To work with a laminate, we need a tool: roulette, pencil, square, electric lobzik, just in case, take a manual saw … When laying a laminate, you need to consider important points. By acquiring a laminate and delivering it to the room where its styling will be performed, it is necessary to decompose it without printing packs on the floor. It is necessary to turn the packs, not a bed of packs on each other, but in the room separately, and in a horizontal position. Be sure to let Lamina lie down a day – two.

Can you put a laminate with your own hands: tools for work To work with a laminate, we need a tool: roulette, pencil, square, electric lobzik, just in case, take a manual saw … When laying a laminate, you need to consider important points. By acquiring a laminate and delivering it to the room where its styling will be performed, it is necessary to decompose it without printing packs on the floor. It is necessary to turn the packs, not a bed of packs on each other, but in the room separately, and in a horizontal position. Be sure to let Lamina lie down a day – two.

  • March 13, 2019

During this time, it warms up to the temperature of the room and spreads in the plane. This is necessary so that the micro -steps would not work, the locks sat at the right angle and did not appear after a time of the gap. Before laying, mark the room so that it does not work out a clin. It is recommended to lay a laminate in the direction of falling light from your window, then there will be almost no noticeable joints between the panels. When laying, the air temperature should be in the range of 18 degrees, the base of the floor of the air is no more than 73 %. These conditions must be maintained during styling, and then within two to three days. Mandatory indentation between walls and panels about 8?10 mm, as well as all non -mobile objects. It is better not to lay a laminate, in rooms with high humidity.