What is the laminate: the characteristics of the coating
Laminate is thin sheets, the thickness of which is from 6 to 11 mm, and the length from one to one and a half meters. The width is on average 20 cm. There are locks on the edge of each panel, due to which there is a docking of individual sheets. The top layer of the panel is a protective film that reliably protects the panel from moisture, sunlight and abrasion during operation. Under the film, paper, which depicts a certain texture of the material and has the necessary color. And under the paper there is already a wood -fiber slab of good strength. And the extreme layer of paper is impregnated with special resins to protect the panels from moisture. Laminate before laying you need to hold in the room for several days. This is important that the material is used to the climate of the room and accept certain sizes. At this time, it is advisable to prepare the surface for laying the laminate, it should be even and stiff. If the surface does not respond to such characteristics, alignment should be carried out and the bending boards should be replaced. Now we choose the direction for styling. It is advisable to lay along the direction of the rays of the sun from the windows of the room. The laying process is carried out depending on the type of laminate. There is an option of adhesive laying, and there is a option of laying a demon. The first panel is laid in the corner, the laminate begins to put it further from it, if at the end of the row I had to cut off a piece of the panel, you can start the next row from the second half of the cut panel. The process continues until the floor is completely laying the floor.
