Technological process and stages of sex varnishing
If the floor is already covered with any finishing material, then before the varnishing it is necessary to completely clean it. The meaning of this procedure is that the surface is cleansed both from the finish itself and from pollution. Any wax spots or traces of fat should also be removed.
In the presence of any noticeable damage on the wooden floor, it is also necessary to grind. The same is true in relation to the new parquet. To make the varnish better, you need to apply a primer. It is absorbed much faster if you dilute it with water before use. Next, you need to grind the skin.
The varnish before use must be stirred to a state in which there will be no bubbles. Additional it needs to survive for about 10 minutes. If the material turned out to be excessively thick, you can add water before use, but not more than 5% of the volume.
Apply varnish using a foam roller. A wide brush that has a soft pile is also suitable. You need to cover this material with thin layers two or three times. The direction of application is selected in such a way that it coincides with the fall of light from the window. Each layer still needs to be sanded with a skin.