Floor covering in the apartment: varieties, care and repair tips
The coating of the laminate is very convenient and its density is greater than the parquet. There are two simple styling methods: for glue and without glue. Combined glue laminate panels are glued together by adding glue to the grooves. With this method, at the end of the installation of panels on glue, the elements are joined, and a very solid single floor coating comes out, with good waterproofing.
The panels without glue are connected using a special lock, which has its advantages – simply and quickly. The laminate is laid by a floating way, the boards cannot be attached to the base with screws or nails to the base.
The laminate can lie on a linolium, a sexual or parquet board, as well as on any even and strong surface. It is not advisable to lay laminate on top of the carpet due to static discharge.
The work always begins with the creation of the first row, two panels are taken, and specially prepared spacer wedges are installed, which will provide a small gap between the wall and the coating of up to 10 mm, this is necessary that after the end of work with styling, the wall does not interfere with the expansion and narrowing of the laminate, otherwise it It may swell.
Having fixed the first row, we move to the second row. We bring the panel at an angle to another panel, is inserted and snap into the castle, it should be located in the middle of the board. You continue to the last row so that the transverse joints do not match.