Stages and rules for the construction of a drywall septum
The tools necessary for work: measuring roulette, level, ruler, cord for strokes, plumb line, corner, pencil, spatula, knife – cutter, punch or drill, adhesive container, screws, dowels, saw, square cell, wedge, putty, putty, putty. The paper is thin sandpaper.
Before starting, you need to determine for what purpose you need a partition. The thickness of your partition = 6.5 mm – 24 mm. In order to make the cladding of walls and partitions, you need to use ceiling drywall. Wall drywall should be applied to the ceiling. Walls. Ceiling, the floor needs to be put in order. They need to be cleaned. Next, you need to make a drawing using a construction cord. For this purpose, you can use a plumb line and level. By the way, the service renting apartments Donetsk offers them at a low price now very popular.
Then you need to make a frame. You need to cut off the profile, along the length that you need. In places where the doors are located, you need to bend the profile at an angle of 90 degrees at a height of about 15-20 cm, while you need to cut the side surface with scissors or nippers. They also use a hacksaw if there are no other tools.
Then you need to take the screws and tighten them to the profile. Next, you need to place a horizontal profile with bent ends up to the bar on the doorbox on the doorbox. Their height = 15-20 cm.