Advantages of installation of laminated floors: Features Before laying, laminate floors must be fenced from sharp temperature differences. It is advisable to unpack them a couple of days before laying and let them lie down in the room where the styling will be made, so their acclimatization will occur. The best floor laying temperature is from 15 to 20 degrees Celsius. For visits that have increased humidity, it is necessary to use a special laminate. By the way, and you knew that when buying a laminate on it, interior printing on fabric and packaging is installed on it.

To lay the laminate, the floor must be prepared. It is necessary to remove the old flooring, the floor should be dry, even and clean. If you are going to put a laminate on steam heating or the floor fully consisting of a mineral slab, then as the basis for the laminate you need to put construction foil. For insulation and absorption of the sound of steps, you can use wool -drive cardboard.

To begin with, the first row of laminate without the use of glue is laid on the wall, it is necessary to check whether it adjacent to the wall and is it exactly whether it lies. If everything is in order, you can continue laying using glue. The joints of the panels of the row in relation to the previous ones should shift about 30 centimeters. Panels must be interconnected by glue.

Having put the first few rows, let the glue dry out. These ranks will be a strong basis for further laying.

You can give a load on a laid laminate only after the glue is completely dried up.