Installation of roofing metal: rules, stages and tips
Business for the construction of houses today can become quite profitable entrepreneurial activities. This simple business idea can be implemented by almost any builder who has appropriate experience, as well as certain starting capital, in principle, as elsewhere.
Since it is very difficult to build a house yourself, for the successful implementation of the plan it is necessary to create your own construction team. Agree, it is difficult to carry out the same roof installation, especially when it is a metal tile material. Laying metal tiles should be done only by professionals who know their job. Installation of the roof from this material is a responsible and complex matter, and therefore it is necessary to approach this especially seriously.
Before starting work, a thorough measurement of all slopes is carried out. The consumption of roofing materials is calculated in accordance with these measured parameters. Metal tile requires special storage and transportation conditions. And the polymer coating, which is applied to the surface of the metal tile, is quite easy to break, without observing the rules of loading and unloading of metal -based sheets. The metal tile is usually laid on wooden bars, and only on a flat surface. And a special wooden material is laid between the sheets, this is done to avoid corrosion.
Installation itself is directly carried out using a specific technology. Laying is done so that its edges would appear somewhere for 30 mm. Due to this, air ventilation will eliminate you moisture under the sheet. Installation can start with the left and right end. Sheets of the gable roof are overlapping, start with the top, and go down in different directions of the slope.