Technology, stages and tips of alignment of a monolithic floor
To repair monolithic floors, use PVA glue and process the edges of cracks. Next, use a repair solution with additives, which will ensure its hardening. Excess repairs should be removed until they hardened. To process the porous structure of the concrete floor, you can use PVA glue that will form a protective film on its surface.
To finish large cracks and holes, you should first remove all the dirt accumulated in them and clean it in order to improve the gravity of the solution with the surface. For decoration, PVA glue can also be used, which is prepared from the calculation of parts of water and glue 5/1. The largest holes and holes should be found in several layers. At the end, the surface is aligned with a spatula.
To align concrete floors, a special self -leveling consistency is used. First you should remove the remaining dirt from the floor, remove the doors and skirting boards. And to prevent the spreading of the solution outside the floor, special fights should be installed along the entire length of the threshold length. The consistency should be diluted according to the instructions and pour the contents, on the floor surface, leveling the contents using a spatula.
A day after pouring the solution, you can install doors and skirting boards.