Technology and stages of laying parquet board
Before laying a parquet board, it is worth checking that the draft floor is clean, and there were no traces of the old coating left. Then the floor will need to be sprinkled and wiped with a damp cloth. After cleaning, it will be necessary to set up the waterproofing throughout the area of laying the parquet. To protect the parquet board from moisture. So that after covering the drawing turns out to be beautiful, it is worth unpacking all the boxes with the parquet board and mix them. The thing is that each box with the board has its own drawing and texture, the difference may not be noticeable at first glance, but after laying the areas will be, they will high. The laying of the boards begins from the wall, thus, the first row is laid.
The boards are fixed with each other using locks on the ends. That’s why the first row is laid in a comb to the wall. The length of the second row boards should be selected so that the seam turns out to be chess. The boards of the last row will need to be fixed using nails, while the hats of nails are necessarily. The gap between the wall and the flooring closes with the help of a baseboard, which is attached not to the parquet, but to the wall. If you install a wooden skirting board, then be sure to paint it first.