How to independently make floors on the basement After arranging the frame along with window and doorways, it is necessary to install the basement of the basement. To do this, use boards with width up to two centimeters. These boards can be different in width. As lag boards, you can use the installation of beams, laying them on the rib so that they do not bend. In this case, these timber should be in a thickness of at least ten centimeters, they are laid half a meter from each other.

Want to install a new door at home, but you don’t know where it is better to buy? We advise you to visit our door store, buying doors on the Internet is best. You can find out more detailed information on our website

In order for these beams to be installed, it is necessary to make holes in the foundation house, allowing to lay the lags in these gaps at one end, and the other end of this beam will rest against the bottom of the binding, while it will be attached to this strapping using special nails. After installing all the beams, their ends should be in contact with the base of the foundation of the house, while it is necessary to wrap the Toli or roofing material on these ends of the beams. After the winding, these ends should have at least fifty centimeters, while the number of turns should be at least two units per beam.

After installing the beams, it is necessary to perform the upholstery of the installed crate, which is performed using boards. The boards are attached to this crate using ordinary nails.