To install the arrow in the lubricant (departure 6 m), click the button located on the left cabinet of the control panel, and transfer the handle to the first position in the direction of reducing the departure of the arrow. Reducing the shooting of the boom after the emergency final circuit breaker is possible, provided that the key with the button is pre -pressed, located on the panel of the departure change mechanism in the machine room. After decreasing the shooting of the boom to 30 m, the mentioned button must be squeezed out. The control mechanism is controlled by a handle with four fixed positions in the directions “forward” and “back”. When moving the crane, a warning signal is heard. Automatic shutdown of the movement mechanism can occur as a result of the operation: elements of protection of the electric drive of the mechanism; the final switch of the cable drum; lever final portal switch. In the last two cases, the mechanism can be included only in the opposite direction. The propenter control is carried out by buttons located on the right cabinet control panel. Turning on and off the oil pump of the propsal system of the spreader system is carried out short -term pressing the buttons, respectively. Location of the spreader on the container is carried out using four guide paws controlled by the buttons.
