Tile laying technology from the most noticeable angle of the room
Now I would like to talk about how to lay tiles from the most noticeable corner. First of all, you need to dilute the glue designed for tiles in a volume of two to three kilograms. You can use an electric drill that has a nozzle for a mixer, in that case? If you do not want to do all this manually. Then it is necessary to apply glue to the floor using an ordinary spatula. It must be remembered that the glue layer should be ten millimeters, no more. It is also important to note that the area when applying glue should be slightly more than the area of the first tile directly. Then, with the help of a toothed spatula, it is necessary to align the glue uniformly, and then along the marking boundary it is necessary to lay the first tile directly on the glue. Do not forget to press the tile two to three millimeters into glue.
And now you need to use the short level. It is required to install the tile clearly on the horizon directly in all directions. It is necessary to take measurements using the level in eight directions, namely two – middle, two – diagonal and four – edges. The level of tiles can be set using a light tapping with a rubber hammer.
Then you can lay the rest of the tiles. It should also be said that the laying horizontal of absolutely all tiles must be carefully checked using a long level. Each tile must be pressed into the prepared solution of glue.