How to put a natural stone on the wall with your own hands A flat wall is not at all required to lay stone, except for those cases when a piece. It is better to put a stone on tile glue, it is highly recommended to wash it before laying, and clean it with a hard brush. When laying the hardest one, take into account the drawing according to which it will be posted.

How to put a natural stone on the wall with your own hands A flat wall is not at all required to lay stone, except for those cases when a piece. It is better to put a stone on tile glue, it is highly recommended to wash it before laying, and clean it with a hard brush. When laying the hardest one, take into account the drawing according to which it will be posted.

In the event that it is necessary under the natural stone, for beauty and practicality it is imperative to monitor that there are no continuous lines in more than two stones, the third should stop them.

When laying, it is also necessary to observe the texture of the stone, shade, and that this is very important, no type will have a large -scale stone of the encirclement small and to the turnover.

It is necessary to lay it not in a row, but carefully choosing, trying on, and only then applying glue. The solution must be put on a stone in a rather large amount, and carefully pressed in the right place, and then remove the excess of the solution that crawled out, simultaneously forming the seam.

From time to time, you need to leave from different angles to look at the work done, take into account the creatures of the drawing, and based on this, plan how to do next.

The piece stone is usually made with one front side, and the other in this case is even, and this makes it possible to lay as a tile.