Basic connection rules and stages of the installation of a shower cabin
Not a single bathhouse has been built without a garbage room in which a shower cabin is usually installed. For considerations of savings, it is best to establish a shower cabin on your own. In order to install the shower correctly, you must first prepare the room. To install the corner cabin, you will need to comply with a free angle with a mandatory correct right angle of 90 degrees, if the cabin is set near the wall, then a sufficient distance should be observed between them. By the way, professional clining is the best option to clean the apartment and office.
The water supply should be made only at the site of installation of the mixer or moved to the corner in which the communications will subsequently be connected and the installation of the panel for hydromassage. The preparation of the shower cabin should be carried out first in any of the rooms, and not at the very place of installation. This will allow you to work out the assembly technology and identify problem areas. Only after you recheck the shower for possible malfunctions several times, you can disassemble it and transferred it to the installation site. After that, you can start installing the cabin according to the scheme specified in the instructions.