Corporal fence: advantages, rules and stages of installation
Fence – an important element of a summer cottage. The fence from the corrugated board is a practical choice that will hide your lands from prying eyes. The installation of such a fence with your own hands is not as difficult as it might seem at first glance.
The first stage, cleanse the proposed place of installation of the fence from extraneous plantations and buildings, including from the old fence. Then, using a harsh thread, mark the fence line in accordance with the boundaries of your section on the cadastral passport. The next step will be dug for pits whose depth depends on the height of the fence, under metal supports. For example, if the height of the fence is 2 meters, the depth of the pits should be at least 70 cm. The fourth stage is the concreting of the pillars. When concreting, you should navigate along the line indicated by a harsh thread, and use the building level so that the supports are strictly vertically.
After pouring the supports, it is necessary to take a break in work for a day, so that the concrete dries. The fifth stage is welding the transverse lag to metal pillars. The number of horizontal rows also depends on the height of the fence. With a height of 2 meters, two rows of transverse lags are enough. The sixth stage will be painting a metal frame with enamel colors. Finally, the final stage is the consolidation of corrugated sheets with self -tapping screws.