Is it possible to install a plastic window with your own hands The misconception is quite widespread that the plastic window is installed only by specially trained people. But this is not quite. On itself, it is possible for any person. It is enough to have only some experience of handling a tool. First of all, the old window block is removed, the wings are removed.

After that, the double -glazed window takes out from the window structure. For this, the sharpened spatula should be used. A thin knife is also suitable. Carefully removed stacks. It is necessary to act as accurately as possible so as not to accidentally damage the window profile. The protective film, which is located on the outer side of the frame, is removed.

The frame can be attached in different ways. Most often used metal dowels or fasteners. From the edges of the fastening frame should be at a distance of about 25 cm. Between the fasteners themselves, it is necessary to leave approximately 60 cm. Before starting the frame, a compressed tape is glued.

The frame is installed in the window reception. After it, it is necessarily checked by the level. You can not put a plastic window “on the eye”, because in the case of a skew, it simply will not close and open. Then the double -glazed window and stacking are inserted. After this it remains only to put on the sash.