Effective methods and decisions on the repair of sex
It happens that the old floorboards can dry out and start to creak. After that, cracks are made between them, in which garbage can constantly clog.
You can get rid of this disadvantage, if you do the following – take a rope or twine, soak them with a carpentry glue, and using a chisel, try to score between the floorboards in the cracks. Wait one day to dry the glue. Next, give the floor a normal look. To do this, take a piece of linoleum of a small -sized oil basis, but in no case should it be insulated. Such linoleum can easily break on bends. Then you need to pour this linoleum with acetone, and make a thick putty out of this solution. In this case, it is necessary to simultaneously stir the dissolving linoleum. Now you can start putting down the cracks prepared by a putty with a spatula. Be sure to clean the seams with a skin, and then you can paint over the floors.
So we got elastic seams, which are not terrible more than a crack. You can also close up the seams with a stencil. It is necessary to cut out of thick paper, or the film itself stencil. Next, a special putty is applied along the stencil with a spatula. In this case, the floors should turn out to be clean, and the seams themselves smeared.