Independent phased filling of a bulk floor
If you want to have under your feet a resistant to various damage and an absolutely smooth surface, then bulk floors will be an ideal option for you. True, we want to warn that the pleasure is completely expensive, but with it you will forget about the change of sex. The first thing to do is remove the old coating to prepare a concrete base. To do this, it is necessary to remove the old glue and mastic from it and cleanse the existing cracks from pollution. Then all cracks and bumps are thrust and let them dry. After that, completely primed the concrete surface. When the surface dries, using a laser level, mark the floor height on the walls. At leisure it will not be superfluous to learn more about suburban construction on the Internet.
Now it is necessary to prepare a solution from a special dry mix purchased in advance for bulk floors, clearly observing the attached instructions. The finished mixture must be immediately poured by the floor, starting from the wall located opposite the door. It is better to fill in parts, leaving the wet surface with a wide spatula or rule, and then roll with a needle roller. Dry such a floor will be 2-3 days. If you dream of the original floors with a pattern, then on a dry bulk floor using a stencil and paints you should apply an image, and then varnish in several layers. In addition, instead of paint, you can pull the original absolutely even tissue, which in the future also pour varnish.