Methods and rules for eliminating defects and damage to partitions
The most common damage to the partitions are cracks in the places of contact of the partitions and walls, defects of the plaster layer on the partitions. If our partitions are wooden, then with high humidity in the room there is a decay of the wooden base, the unsteadiness of the plaster. If a wooden partition is poorly attached to the walls and ceiling, the lower part of the partition began to rot or the base under the partition gave a precipitate, then it should be expected that the partition would become a shaky. If the wooden frame of the partitions is overdried, the walls were precipitated, or the overlap is exposed to vibration, cracks may occur on the plaster of the partition. To eliminate the sedimentation of the partition, it is necessary to determine the weakened parts of the fastening, to close them up, to establish additional. Rotting areas of wooden partitions must be treated with an antiseptic. To eliminate cracks in the partitions, it is necessary to expand the crack itself, then close it with materials for sealing, or to packet. Next, the repair sites are wiped with a solution of lime or gypsum. Bulging partitions must be leveled and fixed.
For very many industries, seamless stainless pipes are extremely necessary, which provide increased tightness, which is extremely important for aggressive and food fluids. We offer you these products in a wide assortment, like any stainless metal rolling, which is among the people, as "Stainless steel"