What materials and tools are needed for laying tiles In addition to the tile itself, it will require adhesive for him, and a jagged trowel, and grout for seams, and a drill with a nozzle of a mixer, and crossings for seams. Previously, it is necessary to prepare the floor itself for laying it with tiles. Когда он бугристый, нужно его заровнять посредством бетона. Before you start laying tiles, it is necessary to dissolve a small amount of glue (about 5 liters). For this purpose, water is poured into the glue and mixed with a drill with a special nozzle to a density of sour cream.

We can withstand for 5 minutes and to start laying. It is necessary to lay out the tile from a prominent place (angle) or from the highest (respectively level). The surface on which we put the tile is pre -wetted with water from a spray, then lay out the solution, align with a jagged trowel and put the tile. Next, you need to align the tile with a small level and twist the warden with a handle. Collect excess solution and lay another tile, placing crosses in the corners and aligning in level and last tiles. The seam between the tiles should be filled to the middle, since the other part will be filled with a grout. When all the whole tile was laid out, the solution must be allowed to dry, and after 24 hours it will be possible to lay out pieces. We determine the required size and cut off a grinder with a diamond disk. Slices lie like ordinary tiles. After 24 hours you can pull the crosses and wipe the seams.