Secrets of high -quality tile laying on the wall
For high -quality tile laying, two days will be needed.
News
Varieties of welding work and basic rules
- by homeandtown
- December 5, 2024
Welding in construction: types, rules and technologies Welding of details for more than a hundred years has been highly developed and today has an important place in all industries.
News
How to independently perform window insulation
- by homeandtown
- December 3, 2024
Ways of independent window insulation in the winter period We love heat very much, especially when you go into the house in winter, and there is just heat.
News
What is the laminate: the characteristics of the coating Laminate is thin sheets, the thickness of which is from 6 to 11 mm, and the length from one to one and a half meters. The width is on average 20 cm. There are locks on the edge of each panel, due to which there is a docking of individual sheets. The top layer of the panel is a protective film that reliably protects the panel from moisture, sunlight and abrasion during operation. Under the film, paper, which depicts a certain texture of the material and has the necessary color. And under the paper there is already a wood -fiber slab of good strength. And the extreme layer of paper is impregnated with special resins to protect the panels from moisture. Laminate before laying you need to hold in the room for several days. This is important that the material is used to the climate of the room and accept certain sizes. At this time, it is advisable to prepare the surface for laying the laminate, it should be even and stiff. If the surface does not respond to such characteristics, alignment should be carried out and the bending boards should be replaced. Now we choose the direction for styling. It is advisable to lay along the direction of the rays of the sun from the windows of the room. The laying process is carried out depending on the type of laminate. There is an option of adhesive laying, and there is a option of laying a demon. The first panel is laid in the corner, the laminate begins to put it further from it, if at the end of the row I had to cut off a piece of the panel, you can start the next row from the second half of the cut panel. The process continues until the floor is completely laying the floor.
- by homeandtown
- March 25, 2019
News
Wall manufacturing technology using steel structures
- by homeandtown
- March 21, 2019
Light steel thin -leaf structures for the construction of a monolithic wall During the construction using technology using light steel thin-leaf structures, the process of manufacturing the walls is as follows:- the frame of the carrier panel of thermal profile, based on LSTK, is filled with the mats of the mineral insulation;- the end is
News
Construction of a house from arbolite: technology and advantages
- by homeandtown
- March 1, 2019
Stages and rules for the construction of a suburban house from Arbolit To build a foundation for a house from a arbolite, a combined type of foundation is chosen.
News
Heat -efficient blocks: use in modern construction and recommendations
- by homeandtown
- February 26, 2019
Design features and advantages of building houses from blocks The technological features of the construction of three -layer thermal efficient blocks include: the possibility of building on low -polluted foundations, the construction of walls from high -precision three -layer blocks, using special construction glue, the possibility of using blocks for external decorative fencing warm walls
News
How to put a cork coating with your own hands
- by homeandtown
- February 18, 2019
Currently, cork coating is very popular. And this is not just like that, because it has a number of advantages.
News
Glass doors and partitions: advantages and installation features
- by homeandtown
- February 11, 2019
Advantages of the device of glass partitions in the apartment The use of glass doors is very popular today.
News
Pipes in construction: classification and purpose
- by homeandtown
- January 31, 2019
Varieties and quality characteristics of pipes in construction The pipe is an industrial product based on a hollow round profile with a constant section.